The water impermeability tester with 6 test points according to EN 12390-8 determines the penetration depth of water under pressure in a concrete sample. The test is performed by clamping the specimen – cubic, cylindrical or prismatic with an edge length or diameter of at least 150 mm – between two flanges with special rubber gaskets. The water is then applied to the surface of the concrete sample under controlled pressure. Water penetration is measured by breaking the specimen after the test period. The amount of water penetrated can also be measured by the measuring burettes attached on the device.
Water impermeability tester with 6 test points according to EN 12390-8;
for testing specimens with the following dimension
- 150 x 150 x 120 mm
- 200 x 200 x 120 mm
- Cylinder with a diameter of 150 mm;
The system is delivered, if not
otherwise agreed with 6 rubber gaskets
for specimen 150 x 150 x 120 mm.
(WxDxH) 1.155 x 905 x 1.864 mm
Order number: BB200024
BB200023-1 Rubber sealing ring for specimens 150 x 150 x 120 mm
BB200023-2 Rubber sealing ring for test specimen 200 x 200 x 120 mm
BB200023-3 Compressor, 8 bar
BB200023-4 Clamping device for cylinder Ø 150, height 300/320 mm
|Packing unit||1 Piece|